Protege EliteSuite Eclipse Manual de instalación descargar pdf (Pagina 25)

All three digits of the Timer value must be entered when programming a mer.

This means that for mes below 100, you must enter [0] then the two digits of the

me. For mes below 10, you must enter [0], [0] followed by the me digit.

To Program the Timer Value

Step 1

To program the Timer value enter the following key press sequence:

, 1, 2, [TIM 1], [TIM 2], [TIM 3],

Where TIM 1 to 3 are the Timer value digits, entered using the 0 to 9 number keys.

Programming the Exit Delay Timer to 0 will result in no exit delay, the system will immediately arm

the EliteSuite® System.

Example:Thesequence,1,2,0,4,5,,setsthemerto45seconds

11.3Alarm/SirenTimer(Menu1,3)

The Alarm/Siren mer is programmed from 000 to 250 minutes (default 4 minutes).

To View the Timer Value

Step 1

To view the Timer value enter the following key press sequence:

, 1, 3,

The Timer value will be displayed as a sequence of three number LED’s lighng one aer the other

corresponding to each of the three digits of the mer.

To Program the Timer Value

Step 1

To program the Timer value enter the following key press sequence:

, 1, 3, [TIM 1], [TIM 2], [TIM 3],

Where TIM 1 to 3 are the mer value digits, entered using the 0 to 9 number keys.

Example:Thesequence,1,3,0,0,5,,setsthemertoveminutes

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 55 56

Sin comentarios

Protege EliteSuite Eclipse Manual de instalación Pagina 25